Semper Pürus Automated Watermaker

GCAAW
Financing Available. The Semper Pürus automated water makers will revolutionize the concept of small, light-weight water maker systems. Available as a portable unit built...
View full description
$10,766

Financing Available.


The Semper Pürus automated water makers will revolutionize the concept of small, light-weight water maker systems. Available as a portable unit built inside a heavy duty wheeled case or as a permanent mount installation, this system has the ability to make up to 30 gallons of water per hour. Semper Pürus engineering uses industrial level control techniques and components to ensure extreme reliability while maintaining an easy-to-use, simplistic approach to operating the system. A touch screen is utilized to access all functions of the unit, and all aspects of the water making cycle are automatic. Continuous pressure regulation, water quality monitoring, and production rate are part of the automatic system and are displayed in the graphic animations on the touch screen. Systems with capacities up to 20 gallons per hour can be run from a 4 KW inverter and VFD controlled start technology is available for the high pressure pump on the larger units. The small footprint makes it easy to find a location for the components, and the system is a breeze to service. Turn it on, push a button, and walk away. The system will handle everything from activating pumps to automatically flushing itself when the cycle is complete.

View how our Semper Pürus Automated Water Makers compare to other products on the market.

Read More
Read Less

Compact fully automated water making system.

Intuitive touch screen control system for simplistic, intuitive operation.

Produces up to 30 gallons of clean water per hour.

Enhanced pressure control system provides consistent pressure during water making cycles and over pressure safety to protect your investment.

Self-priming pumps and continuous duty motors for reliability.

Solid state pump control eliminates contacts and improves reliability.

Water quality monitor with alarm and production flow rate displays are incorporated into the touch screen.

Ultraviolet Light standard with all systems certified 99.6% efficient.

Integrated automatic flush system to eliminate bacteria and prolong the life of the components.

Self-contained small footprint components for simplistic installation.

Can operate on seawater or brackish water.

Every system 100% tested prior to shipment.

Designed and built in America by Veterans.

Power Requirements: 120 volts AC, 20 amp circuit, 12 -18-amp nominal operating load depending upon pump horsepower

Physical Dimensions:

  - Power module 28” L x 12” W x 14.5” H

  - Control Panel, 15.25”H x 12”W x 5.75”D

  - Snap rack membrane housing assembly 29”L x 12”W x 4.75”H.

Maximum water production: 10-30 gallons per hour, depending upon membrane configuration

2521 MRP Membrane Housing rated at 1000 psi

2.5” x 21” RO Sea Water Membranes (1-3)

.3 HP Continuous Duty Self Priming Feed Pump

1-1.5 HP Continuous Duty Self Priming High-Pressure Pump (specification dependent)

5 Micron Sediment Filter

5 Micron Carbon Filter to remove chlorine during flush cycle

Ultraviolet Light for final purification (certified 99.6% efficient, 2 gpm rated flow rate)

Continuous water quality monitoring via an integrated TDS Meter with on-screen display

On-screen digital flow indicator displays flow rate in GPM, and total water produced

Operating pressure range 750-800 psi. Automatic safety pressure reduction at 835 psi and over pressure safety shutdown set to 850 psi

Automated continuous pressure regulation and monitoring

All pipe fittings are corrosion resistance

System Valves are marine grade stainless or poly

Automated flush system to eliminate bacteria and prolong the life of the components, including membranes and pumps

Main Control Panel with Touch Screen

Automatic Flush System

Pickling Control System

Operation and Installation Manual

Common Power Unit:

  - High Pressure pump

  - Feed Pump with Motor

  - Motor Power Panel with Electrical Controls

  - Sediment Filters and Carbon Filter

  - Flow Sensor System

  - Water Quality Monitor System

  - Automated Pressure Control System

  - Connections for All Tubing and Hoses

  - UV Light Water Purifier (99.6% efficient)

Snap Rack Membrane/Housing Mount

  - Membrane Housings with Membranes preassembled

  - High and Low Pressure Tubing with Connectors

  - High Pressure Hose from HP Pump (up to 6 feet)

Customer Reviews

Based on 2 reviews Write a review

Pre Sale Questions

Water maker systems work by utilizing an extremely fine filter called a membrane through which raw water is pushed via a high pressure pump. The membrane only permits water molecules to pass through and rejects 99.9% of everything else including salt, bacteria, and most viruses.
As a guideline, most cruisers use 20 gallons of water per day per person. If you are planning on having 2 people on board, you should have a minimum of 40 gallons per day available. For 2 people a 20 gallon per hour water maker is sufficient.
It is not recommended to make water while underway because of the chance of drawing fuel or oil into the system which would destroy the membrane.

Most Asked Technical Questions

All filters should be changed annually even if they do not need to be changed.
You will need a 20 amp dedicated electrical service. space for the equipment, a minimum of 1 thru-hull but 2 are recommended, and a clean, dry environment for the control system
With proper maintenance the membranes should last for 5-10 years.
There is very little maintenance on our system. However, there are some checks to do and are listed in the user’s manual. Some checks include looking at the piping and valving once per month and, even though the system establishes the pressure automatically, you should visually verify the pressure every 10th use.
You have successfully subscribed!
This email has been registered